Ceiling fans are an essential part of your living room, guest room, or anywhere else. Choose the right fit for your interior is always on top of priority. Choosing and installing the ceiling fan is not the only concern to look after. There are a lot of common issues that nearly every ceiling fan has. This article focuses on the most common ceiling fan problems and the troubleshooting guide to fix them early.
1- Why is the ceiling fan being noisy?
More or less, ceiling fans will have some noise issues. The reason being is an electrical appliance with moving blades. Older fan models, no doubt, will need more maintenance and oiling. Is this enough?
What to do with the murmuring and other noises constantly coming from these fans? The most uncomplicated advice to troubleshoot this problem is to examine all the parts, either moving or non-moving.
Dozens of parts and components hold the ceiling fan together so that it hangs stabled on the roof. But the fact is that whether a fan is new or older, tiny screws might start to lose their grip due to continuous motion, leading to noise issues that are constantly coming from rattling parts of the fan.
How to fix a noisy ceiling fan?
Factory production might have left some screws less tightened as per the mark. Check all the screw connections and joints while making a purchase. The loose-fitting can end up in the ventilator noise. For double surety, wrap Teflon tape over the screw before screwing them in, which will keep them intact and prevent the loosening of the screw.
2- What is causing the flickering of lights in a ceiling fan?
Flickering of lights is very common in newer ceiling fans. Fancy fans have lights to make it look like a chandelier. Although many fans have energy-saving LED lights, dimming will help in lower energy consumption, but on the other side dimmers end up flickering as an ultimate result. Another cause of flickering could be the problem with the built-in current limiter. They limit the current by controlling the supply of current on higher watt bulbs. These limiters might end up flickering when they go wrong.
How to Fix Flickering of Lights?
Buy the ceiling fan model that includes a wall switch to control the fan and light dimming settings. If you face a problem with your current limiter, you can either remove it or replace it. If you go for the change, you need not be worried about the issue of wattages. If you remove the limiter, you will be able to use lights with lower wattages. The reason being is how much your ceiling fan wires can handle the type of light bulb used. A better suggestion would be to replace the light bulb limiter to avoid the risk of electrical fires. These fancy light bulbs may have excessive wattage for that fanlight.
3- What is the cause of a wobbling issue in the ceiling fan?
Wobbling is the result that occurs when something is off-center, either blade balancing or fitting of the ceiling fan. If the blades' placing is not scientifically correct or accidentally bent, the fan can wobble entirely. There are special kits in the market dedicated to fixing this issue. The solution is they include little weights attached to fan blades to even-out that is off-center.
You might not have noticed the other reason where the wobble could start. The down rod could often be loose because it may not fit into a locking slot properly. Overlong down rod usually ends up wobbling.
How to fix the wobbling issue in the ceiling fan?
While purchasing the ceiling fan, always look into details. Even after the blades are designed mechanically without any error, it is better to measure one blade's tip with the rear edge of the next when they are fixed around the motor with equal spacing. They should have equal distance. When it comes to a down rod, the anchor needs to be secure to avoid slipping or sliding. It should be in a downward position all the time.
4- Why is the ceiling fan stuck on one speed?
Ceiling fans can get clung on one speed or only blow a bijou amount of air. One primary reason behind this is if ball bearings are not lubricated or cleaned correctly. But this issue can also mean that there might be a defect in your ceiling fan. Troubles such as an overheating motor or a bad capacitor tend to affect ceiling fans stuck at one speed.
How to fix ceiling fans stuck at the same speed?
Replacing the capacitor will troubleshoot all the problems caused. Make sure you choose the right type of capacitor that is feasible for your ceiling fan. Otherwise, you will end up with a non-working of the number of speed settings and controls.
5- Why is the ceiling fan unfit for the room size?
Maybe you had no idea what type of fan to purchase and bought a fan that looked pleasant in looks. Prioritizing aesthetics over necessity can lead to a foolish mistake. For a small room, a big fan will look like a wind tunnel, and for a large room, a standard fan could be a wrong choice because it will not blow the proper amount of air.
Where to purchase the right ceiling fan for your home?
While buying the right ceiling fan, one must consider the room's size and find the perfect ceiling fan by comparing the standard cubic feet per minute guidelines and dimensions. Anemos will give you the best choice along with the suitable size for your spaces. Why compromise when you can have the best!